Copyrighted materials, concepts, and concept art. -- (c) Higher Ground Web Technologies, LLC.

The materials, concepts, and concept art displayed below are presented here in public for use by paintball players to use in making and modifying their own markers; however, this presentation does not convey rights to anyone to produce for resell items based on the concepts presented here. If any manufacturer so desires these rights, please contact:

John Edens : john@hgwt.net -- or pm thumper on mcarterbrown.com

---------------------------------------------------------------------------

Original Prototype : 99 Belsales Evo-X RF, Stock WGP Pot Metal Frame w/ Original WGP Sniper II Guts, Stock WGP 2K pump kit w/ WWA 99/2K pump guide rod

Prototype completed 2.16.2008

Below: I played with this one as well - but in the end left it non-AT'ed -- Note the 45 frame, WGP Sniper II guts - and especially how the trigger is set such that the portion of the trigger that crossed the safety hole does not block the safety hole at all. This hole is very close to 3/16" (or just right for a #10 brass rod)

Below : Components
3/16" brass rod,
#10x 5/16" x 1" Aluminum Spacer,
1/8" steel rod or 1/8" brass rod
#4x40 screws (or #4x40 CCM shoulder bolts)
#10x32 nut
#10 brass washers

In my 3rd attempt, I AT'ed by sons blue 98 Belsales Evolution Sniper II using a stock WGP Carbon Fiber frame w/ tastey PMI rubber grips. I used a touch of super glue to hold the trigger pivot pin in place to keep it from sliding back.

Close up of one of my CAMs

note: the brass washers are sort of optional, but they can be used to allign the slot in the CAM with the